About Plasma ALD, LLC

The Plasma Enhanced Atomic Layer Deposition Publication Database is developed and maintained by Plasma ALD, LLC, a developer and supplier of inductively coupled plasma (ICP) sources for plasma-enhanced atomic layer deposition (PEALD), atomic layer etch (ALE), thin-film etching, surface cleaning, surface modification, and research plasma systems.

Our ICP sources are designed for integration with existing ALD and vacuum-processing equipment. Plasma ALD also provides plasma-source integration, process-development, and troubleshooting assistance based on decades of experience with low-pressure plasma processing and PEALD systems.

Researchers, universities, equipment manufacturers, and laboratories looking for an ICP plasma source or assistance adding plasma capability to a vacuum system can learn more on our Plasma Sources page.

Effects of NH3 pulse plasma on atomic layer deposition of tungsten nitride diffusion barrier

Type:
Journal
Info:
J. Vac. Sci. Technol. B 24(3), May/Jun 2006
Date:
2006-04-17
DOI:
http://dx.doi.org/10.1116/1.2203639

Author Information

Name Institution
Chang Woo LeeKookmin University
Yong Tae KimKookmin University

Films

Thermal WN

Hardware used: Unknown
WF6, Tungsten Hexafluoride
CAS#: 7783-82-6
NH3, Ammonia
CAS#: 7664-41-7
Deposition Temperature Range = 300-350C

Plasma WN

Hardware used: Unknown
WF6, Tungsten Hexafluoride
CAS#: 7783-82-6
NH3, Ammonia
CAS#: 7664-41-7
Deposition Temperature Range = 300-350C

Film/Plasma Properties

Characteristic: Chemical Composition, Impurities
Analysis: RBS, Rutherford Backscattering Spectrometry
Diagnostic: -

Characteristic: Chemical Composition, Impurities
Analysis: AES, Auger Electron Spectroscopy
Diagnostic: -

Characteristic: Interfacial Layer
Analysis: TEM, Transmission Electron Microscope
Diagnostic: -

Characteristic: Diffusion Barrier Properties
Analysis: RBS, Rutherford Backscattering Spectrometry
Diagnostic: -

Substrates

Si(100)
SiO2

Notes

WF6 reacts directly with Si and SiO2 to make volatile SiF4.
Pulsed NH3 plasma converts surface to Si-O-N which prevents the spontaneous Si etching from the WF6 exposure.
309